Deutsch English Español Francais Italiano Português
Silicone spray, silicone lubricant spray, silicone spray iBiotec, silicone spray manufacturer, waterproofing spray, silicone release agent, silicone release agent spray, food grade silicone spray
Last update: 2019/03/11 10:48

MULTI-PURPOSE NON-GREASY SILICONE AEROSOL

LUBRICANT, MOULD RELEASE, NON-STICK

WATERPROOFING, INSULATING, GLOSSING

CERTIFIED NSF H1 FOR THE FOOD INDUSTRY (IAA)

NEUTRAL, FILMOGENOUS, NON-STAINING, ODOURLESS      

USABLE ON ALL METALS, THERMOPLASTICS

ELASTOMERS, THERMOSETS, WOOD, STONE,  CONCRETE

iBiotec DÉMOPLAST® SIL 850

 

 

DESCRIPTION

Multi-purpose non-greasy product for difficult demoulding operations and lubrication problems in a clean environment.
Colourless, odourless product, with special non-stick properties at interfaces.

Perfectly filmogenous, non-staining. 
Can also be used as a waterproofing agent and a glossing agent.
Product with strong anti-fungal and anti-mildew properties.
Gives the demoulded parts a satin-effect to glossy finish.
Can also be used as a non-stick agent for spatter during welding on parts or sheets not intended for subsequent painting or coating.
Usable on all materials such as wood, plastics, elastomers, steel, carbon steel, chrome steel, and light or copper alloys.


Guaranteed free from :

CFC, T111, Dichloromethane, Perchloroethylene, Trichloroethylene and aromatic compounds.

 

APPLICATIONS

iBiotec Démoplast SIL 850 is a lubricant, non-stick, mould release, non-greasy insulating product, without risk of throw-off or transfer. Its adhesion to surfaces makes it perfectly safe for many applications, particularly in the foodstuffs industries.

In the wrapping and packaging sector, particularly in the food industry, demoulding in plastic injection and blow moulding injection.

Non-stick treatment of cutters, including skin pack or blister pack applications.

Slipping of heavy packages, grouped in skin packs on elastomer conveyor belts.

Lubrication of screw driving heads whilst maintaining torque.

 

Thanks to its high-temperature performance above 250°C, its can be used as a non-stick agent to treat extrusion cylinders for PE stretch films.

Insulating and waterproofing treatment for paper, cardboard, and leather.

Non-stick treatment of compression, encapsulation or granulation dies in the pharmaceutical and parapharmaceutical industries.

Demoulding of PU, PE, and epoxy castings.

 

In the civil engineering and construction sectors, Démoplast SIL 850 is an excellent waterproofing product and an agent providing protection against mould and fungus on porous materials and porous cut stone.

Thanks to its very low surface tension, it provides penetrating, durable, effective treatment that lasts several decades.

 

                             Download the data sheet

 

TYPICAL PHYSICAL-CHEMICAL PROPERTIES

PROPERTIES

STANDARD or METHOD

VALUES

UNITS

Appearance

Visual

 Fluid

-

Saybolt colour

NF M 07.003

ASTM D 156

+10

value

Smell

Olfactory

No smell

-

Density at 20°C

ISO 12.155

973

g/l

Utilisation temperature range

-

-40°C+250°C

-

Surface tension at 20°C

ISO 6297

21.1

dyne/cm

ACTIVE SUBSTANCE PROPERTIES

PROPERTIES

STANDARD or METHOD

VALUES

UNITS

Kinematic viscosity at 25°C

NF EN 3104

1000

mm²/sec

Self-combustion point

ASTM E 659

>300

°C

Acid index la

ISO 6618

0.0

mg/(KOH)/l

Sulphated ash content

NFT 60,144

0.0

%

Impurities content larger than 5 µm

FTMS 791 3005

0

number/ml

Elastomer compatibility

Dimensional variation 168 h at 40°C

 

FTM 791

 

less than 0.1

 

%

Environmental properties

Bioaccumulation index

Octanol/water ratio

 

OECD 107

 

less than 3

 

log kOW

Danger category for water

WGK

Category 1 no danger

for water

category

Refraction index

ISO 5661

1.404

 

Dielectric strength

ASTM D 149

IEC 60.243

18

kV/mm

 

PRESENTATION

 

 

 

 

 

 

 

 

 

 

 

      Aerosol 650 ml

 

 

silicone aerosol lubricant, plastic mould release, plastic mould release aerosol, plastic food contact mould release, silicone non-stick, silicone waterproofing. Mould release suppliers. Mould release manufacturers. Silicone aerosol. Silicone suppliers. Waterproofing aerosol, food-contact silicone. Glossing aerosol. Mould release agent. Slip agent. Treatment of conveyor belts. Non-stick for skin pack. Skin pack slipping

 

 

 

 

 

 

 

 

 

 

 

 

 

Product for the food industry (IAA)
Using an HACCP approach or method

Analysis of dangers and critical points to control them

ISO 22 000 CODEX ALIMENTARIUS

 

Category NSF: 

H1 lubricant : usable in food manufacturing areas. Usable as an anti-corrosion agent, non-stick for tank lid seals, lubricant for equipment located in potential food-contact areas.

 

Looking for another product?

Discover our entire range by clicking on the photo

Silicone spray, silicone lubricant spray, silicone spray iBiotec, silicone spray manufacturer, waterproofing spray, silicone release agent, silicone release agent spray, food grade silicone spray

 

Manufacturing, lubrification, cleansing, protection,
IBiotec
® Tec Industries® Service
offers a wide range of products reserved for industrial area

 


 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 


IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.



IBiotec® Tec Industries®Service is on : YOUTUBE